SERVING THE WESTERN STATES SINCE 1972
|
SERVING THE WESTERN STATES SINCE 1972
|
ALSO SEE OUR Q & A PAGE
NOW ***********************************************************************************************************************************************
*********************************************************************************************************************************************** HEAT and MORE THE LARGEST WEST COAST OUTDOOR FURNACE DISTRIBUTOR (If you are located in other parts of the US please give the factory a call for a dealer near you 888-628-3533) WE STOCK ALL THE OTHER PARTS, ACCESSORIES AND EQUIPMENT YOU MAY NEED FOR A COMPLETE SYSTEM
*
|
| Home |
Domestic Hot
Water
|
Farm Shop
|
|
|
|
|
 Pool & Spa |
 |
 Driveway |
 |
|
|
| Greenhouse |
Washer &
Dryer
|
Garage or
Workshop
|
| SPECIFICATIONS | Model 555 |
Model 1000 |
Model 2000 |
| Warranty | 10 Years | 10 Years | 10 Years |
| Weight (lbs.) | 1455 | 1710 | 2075 |
| Height* | 92" | 92" | 92" |
| Width* | 52" | 66" | 66" |
| Length* | 69" | 79" | 96* |
| Forced Draft (CFM) | 75 | 150 | 265 |
| Chimney Size | 8" | 8" | 8" |
| Firebox Length | 30" | 38" | 55" |
| Heating Area (Sq. Ft.) | 3,000 | 5,000 | 10,000 |
| Water Capacity (US Gal.) | 137 | 163 | 215 |
| Firebox Door Opening | 24x24" | 24x24" | 24x24" |
| Insulation | 6" SIDES | 10" SIDES | 10" SIDES |
| Insulation | 10" TOP | 20" TOP | 20" TOP |
HeatSource1 PRICING
prices effective 7/1/08 subject to change without notice
MODEL 555 (30" firebox) $5995.00
MODEL 1000 (38" firebox) $7395.00
MODEL 2000 (55" firebox) $8995.00
PRICE INCLUDES DELIVERY WITHIN 50 MILES OF MULINO, OREGON
MINIMAL CHARGE FOR FURTHER
* WATER EXPANSION
* NIGHT LIGHT AND INDICATOR
* ELECTRONIC CONTROLS
* STAINLESS STEEL WATER CHAMBER
* LARGE LOADING & CAM LATCHED
WATER COOLED FIRE DOOR
* CAST IRON GRATES
* ASH REMOVAL AUGER
* THERMOSTATIC CONTROLLED DRAFT FAN
*Burning wood in a HEATSOURCE 1 outdoor wood furnace is an inexpensive, hassle free heat source.
HEATSOURCE 1 operates on a simple but
very efficient principle. 
The
furnace heats water to its optimal heating temperature which is constantly
maintained by automatic controls. The heated water is then piped
underground through insulated pipes to the desired location; this transfer of
water is more efficient than forced air. A circulation pump continuously
circulates the heated water to provide proper heat distribution and ensure that
the desired temperature is maintained. A domestic hot water assembly is
available which attaches to your present hot water heater to provide you with a
near constant flow of hot water for your home use.
The versatile design of the HEATSOURCE 1 make it compatible with existing heating systems: hot water, forced air, radiant baseboard, water-to-water, and in-floor. The installation is easy and allows HEATSOURCE 1 to be used as the primary heat source or in conjunction with your current heating system.
Your home is one of your biggest investments. 
It's
where your family spends a great deal of time. And you spend a
considerable amount of money making it comfortable and enjoyable. Firewood
can be dirty, moldy, and riddled with insects, which can create a mess in your
home. Burning indoors means smoke, ashes, odors, and an eventual buildup
of soot on your walls and ceilings, not to mention heat loss caused by hauling
firewood in and ashes out. With HEATSOURCE 1
outdoor wood furnace, you avoid all of these problems. Many customers have
noticed that using HEATSOURCE 1 for heating
(thereby eliminating indoor burning) has helped alleviate respiratory and
allergy problems. And, they've found that HEATSOURCE
1 allows them to heat additional buildings, such as a garage, shop,
barn, greenhouse or even a swimming pool - with a single heating unit.
HEATSOURCE 1 outdoor wood furnaces are designed to wok with existing heating system to provide 100 percent of your heating needs. A domestic water-to-water heat exchanger can be added for all of your hot water needs. All systems are thermostatically controlled for steady, even heat.
HEATSOURCE 1 outdoor wood furnaces are so simple and straight forward, they can generally be owner installed.
HEATSOURCE 1 outdoor wood furnaces are made with all UL approved electrical components which are readily available.
HEATSOURCE 1 is built in a modular
design. In the unlikely event of a malfunction, you need only replace the
defective part.
 |
Forced Air System ... By installing a water-to-air heat exchanger, your entire home can be completely heated by HEATSOURCE 1 outdoor wood furnace using the existing duct work. Your present furnace serves as a back-up. |
| Radiant Panel or Baseboard System ... HEATSOURCE 1 outdoor wood furnace will heat your entire home with a new or existing baseboard or radiant heat system. Your current boiler serves as a back-up. |  |
 |
Radiant Floor Heating System ... A radiant floor heating system can be installed during construction in a concrete slab, or tubes can be fastened between wood floor joists in new or existing structures. |
 |
ESTIMATED D.I.Y COST TO ADD OUTDOOR FURNACE INTO EXISTING FORCED AIR FURNACE AND WATER HEATER: (home is 50' from furnace) |
|
15 BAGS - PREMIX CONCRETE..............(conc pad )...........................$ 37.00 |
| 50 ft - TIMESAVER PIPE...................................................................$375.00 |
| 1 kit - REAR HOOKUP KIT................................................................$ 79.00 |
|
1 ea - CIRCULATION PUMP...........................................................$ 119.00 |
|
1 kit - WATER to WATER HOOKUP KIT (for water heater)..........$ 52.00 |
|
1 ea - MIXING VALVE ................(manual).......................................$ 32.00 |
|
1 ea - WATER to AIR HEAT EXCHANGER........140,00 btu..........$240.00 |
|
Misc. - MISC. PIPE AND FITTINGS......(estimate).............................$ 50.00 |
TOTAL MATERIALS...........................................................$984.00
FACTORY WEB SITE WWW.HEATSOURCE1.COM
FACTORY PHONE 888-628-3533
